防蝕鋳造
定番加工 砂鋳造 青銅 青銅 銅部品 銅鋳造 図面とサンプルに従って
This page covers custom sand-cast bushings in tin bronze or brass, specified from drawings or samples. Define the drawing or sample reference Provide the drawing revision or identify the reference sample. State which sample dimensions and features are critical to the replacement part. Confirm the ...
アルミ ブロンズ ブッシング カスタム 砂 鋳造 青銅 手芸 ハードウェア 加工 非標準 銅 鋳造
This page covers aluminum bronze bushings and custom brass or copper-alloy castings for hardware applications. Prepare a bushing or hardware drawing For bushings, identify the shaft and housing interfaces and the required fits. For hardware castings, identify the finished geometry and attachment ...
青銅鋳物 青銅鋳物 砂鋳物 青銅鋳物 管材 供給
This page covers brass bushings and brass or bronze castings. Sand casting and die casting should be treated as separate process requirements, not assumed to apply together to every part. Separate product and process requirements Specify whether a brass bushing or another casting is required. ...
精密鋳造 銅 管 锡 青銅 青銅 各種 バルブ メカニカル 部品 配件
This page covers copper-alloy bushings, valve parts and mechanical accessories in tin bronze or brass. Identify the component being quoted State whether the enquiry concerns a bushing, valve component or another accessory. Identify the alloy for each line item rather than treating brass and tin ...
ハンドクラフト ハードウェア 加工 鋳造 砂鋳造 アルミ ブロンズ パーツ オーダーメイド 非標準 銅 ブッシング
This page covers sand-cast aluminum bronze parts and custom non-standard bushings. Define the casting and finished features Provide the casting outline and identify surfaces that require machining. For a bushing, show bore, outside diameter, length and required fits. Identify any decorative or ...
外部給油不要のブシュ
This bushing requires no external lubrication. Provide the intended operating conditions so the part specification and suitability can be reviewed for the application. Application information Provide shaft size, housing bore, bushing length and required fits. State load, speed, temperature and ...
一体加工されたスリーブブッシュから図面まで
This product is a one-piece machined sleeve bushing. The enquiry should define the part geometry and its mating components. Provide the drawing revision and required material rather than relying on a generic bushing description. Assembly details Identify the shaft diameter, housing bore and required ...
お客様の図面に基づいたカスタム ブッシング
This page covers a single bushing product. Define the finished bushing on a controlled drawing before requesting a quotation. Identify the required material and the dimensions that form the shaft and housing interfaces. Part requirements Mark the datum references and critical tolerances. Specify ...
C93200 ブシュと図面
This product is a C93200 bushing. Provide the component drawing, applicable material specification and required dimensions for a part-specific quotation. Drawing information Identify the bore, outside diameter, overall length and required fits. Show grooves, holes and shoulders where required by the ...
カスタム真鍮および青銅のバルブ本体鋳物
A valve body casting enquiry needs a defined drawing, material and acceptance basis. State whether the requested supply is a casting blank or a machined body; neither description establishes a complete valve assembly. Define the pressure boundary and interfaces Attach the controlled body drawing and ...
アルミニウム青銅鋳造ブッシュから絞りまで
For an aluminum bronze cast bushing enquiry, separate casting requirements from finished machined dimensions. Attach the relevant drawings so the proposed supply scope is clear. Specify the casting and machining scope Name the aluminum bronze grade and material specification. Identify whether the ...
小型モーターアセンブリ用の銅合金ブッシュ
For a copper-alloy bushing used in a small motor assembly, define the finished part and lubrication requirements before comparing quotations for a replacement or new assembly. Provide the motor assembly requirements Attach the drawing with bore, outside diameter, length and relevant geometric ...
フランジ付き青銅ブッシュから絞りへ
A flanged bronze bushing needs more definition than its bore and length. Include the flange and sleeve geometry so the proposed part can be checked against its mating assembly. Dimension the flange and sleeve together Provide bore diameter, sleeve outside diameter and overall length. Show flange ...
繊維仕上げ機械用青銅製ブッシュ
For a textile finishing machinery replacement, identify the bushing by its drawing and location in the machine. A machine model helps describe the enquiry, but does not replace component dimensions. Identify the replacement part Provide the machine reference and the location or function of the ...
掘削機のブッシュから顧客の図面まで
An excavator bushing should be matched to its part drawing and installation position. Use the machine and part references to identify the enquiry, then confirm dimensions and material before accepting a replacement. Supply an unambiguous dimensional specification Identify the excavator model, ...
